Manual Traffic Control for Entrances and Exits

Manually operated barriers are suitable for clear passage widths up to 8.0 m; the maximum blocking width is somewhat larger due to the excess length on the operator's side.

Models

• Type 60 with oval pole section for a maximum
  passage width of up to 6.00 m
• Type 80 with trapezoidal formed pole section for maximum
  passage width of up to 8.00 m

Quality Characteristics

•  Long-term corrosion protection using high arc galvanizing plus multiple layers of bonded plastic for a perfect maintenance free surface.

Vertical Manually Operated Barrier Type 60
with oval pole section, clear passage up to 6.00 m

• pole stand made out of steel with base plate
• rubber buffers as limit stops for the open position of the pole as well as the roller bearing axle
• pole made out of aluminium section 125 x 93 mm with oval cross section, plastic coated
• easy operation using the handle bar and counter weight
• can be secured in open and closed position using a bolt and locked into place using a padlock
• maximum clear passage width 6.00 m

Vertical Manually Operated Barrier Type 80
with oval pole section, clear passage up to 8.00 m

• pole stand made out of steel with base plate
• rubber buffers as limit stops for the open position of the pole as well as the roller bearing axle
• pole made out of tapered aluminium section, trapezoidal formed cross section, plastic coated
• easy operation using the handle bar and counter weight
• can be secured in the open and closed position using a bolt and locked into place using a padlock
• maximum clear passage width 8.00 m